These bags are very easy to use: just put the finest mesh (black) in a bucket, the medium mesh (green) inside it and the yellow mesh on top of it, leaving a space of about 8cm between the meshes. Then, fold the edges so that they are attached to the bucket and stretch the bags well without leaving any wrinkles to avoid any traces of hashish in them.

Fill the bucket up to 15 cm from the edge with very cold water, removing any air that may remain between the bags, and place a layer of ice on top. On top of the ice, place a layer of plant material. Repeat the operation, finishing with a layer of ice. The bucket should be filled up to 5 cm from the edge. Let it rest for 15 minutes.

Using a mixer fitted with whisk attachments (never blades), stir the mixture for 15 minutes at low speed.

Next, shake the bucket and wait for the mixture to settle at the bottom. Repeat this step 4 times. Remove the coarse mesh bag and squeeze to drain the water completely. Remove the fine mesh bag, allowing the water to drain. The sieve will remain inside the mesh. Remove the sieve and sift it onto a plate using a spoon and a strainer. Once the process is complete, transfer the material to a dry plate.

Let it rest for 12 hours and then sift again. Repeat this step 12 hours later and let it dry for another 24 hours.

It is recommended to purge any plant material, branches or other material that could damage the mesh. After several uses, the finer meshes may become clogged, so it is advisable to clean them with alcohol.

Characteristics

• Black Mesh: 25 microns
• Green Mesh: 70 microns
• Yellow Mesh: 190 microns