This LEC ballast is for 315w CMH bulbs of any brand, Philips, Lumafarm, Solux etc. It includes an upgrade of the components, power regulator and superlumens.

The LEC SOLUX PRO 315w electronic ballast does not produce flickering in the bulbs and is completely silent. It uses a scaled ignition system, which means that if you install several LEC Solux Pro units in your crop, they will turn on with a random delay between them of 0 to 7 seconds. This timed ignition system prevents voltage drops when turning on the crop.

SOLUX PRO LEC has a built-in internal microprocessor that automatically detects the working voltage of the LEC bulb that we install and can thus turn it on smoothly to prolong its life.

Like good quality LEC ballasts, Lumafarm or Philips, it has a quick start system so that the CMH bulb shines at its maximum just 2-3 minutes after being switched on.

The Solux Pro LEC starter or ballast is also able to detect the end of bulb life, automatically disconnecting until the CHM lamp is replaced.

It also has overheating and overload protection. However, it is recommended to install the ballast in a dry and cool area so that it lasts longer.

The old Solux Lec Pro model takes approximately 30-35 minutes to reset the bulb if there is a power cut or overheating. In the new Solux Pro Selecta model this problem has been solved and the reset time is approximately 8-10 minutes. The Solux Pro is electronic so it does not produce flickering in the bulbs and is completely silent.

In addition to these advantages that improve our cultivation, we must also highlight the safety measures that make the Solux Pro electronic ballast one of the best.

The Solux pro LEC ballast includes extra protection against overloads or high temperature peaks, which would cause it to shut off to prevent breakages or even fires.

In case of emergency shutdown due to excessive heat, the ballast will take about 30-35 minutes to work again to ensure proper cooling of the ceramic bulb socket. When the bulb burns out for any reason, the ballast detects the lack of bulb and stops working for safety.

Characteristics:

• Voltage: 240V 5/60Hz
• THD < 8%
• Output power: 315W
• Dimensions: 23x12x8cm
• Weight: 1.9kg