CANNA Coco A and B is composed of value-added minerals and also contains natural chelates, humic and fulvic acids that allow the plant to optimally absorb nutrients.

Thanks to the special characteristics of the coconut substrate, CANNA COCO does not require Vega and Flores variants, but only needs a single formula for both the growth and flowering phases. CANNA COCO is easy to use, dissolves immediately and is perfect for growing in any water system, such as open irrigation, flood irrigation and ebb and flow irrigation.

The nutrients in CANNA COCO are divided into component A and component B, and there is a good reason for this division. If some of the elements A and B are added at the same time, they block each other and the plant cannot absorb them, therefore, component A must be added first and then component B.

Instructions for use;

Fill the nutrition tank with water and add Coconut in a ratio of 1:250 (400ml A and 400ml B per 100 L of water). First add Coconut A to the tank, mix well, then add Coconut B and mix well again and let it sit for a few hours.

The EC of Coconut dissolved in (tap) water will then be between 1.2-2.3 mS (=the EC of the solution + the EC of the water)

Recommended pH value: 5.5-6.2.

In intensive crops, supply this nutrient 1-3 times a day to the plants and ensure drainage of between 10% and 20%. In general, this means 3-6 liters of nutrient per m2 per day.

CANNA Coconut nutrient can be used for both the growth phase and the flowering phase. Concentrates A and B should NEVER be mixed in their pure state: insoluble combinations will be formed that cannot be absorbed by plants.